Новости

How does synthetic resin tile install ability firmly? Any skills?

In recent years, synthetic resin tiles stand out in all fields of the industry with their own excellent performance and beautiful and atmospheric appearance. Whether walking in the bustling streets, or shuttling in the ancient streets, you can find its figure. However, although the product performance is good, if you do not pay attention to the installation details, it may cause rain leakage, cracking, short service life and other problems. Therefore, want resin tile to use a long time, in addition to buying good quality resin tile, standard installation is also very important. Today, we will discuss how the resin tile to install the firm.

  1. The synthetic resin tile needs the pilot hole before fixation, and the aperture must be greater than 50% of the diameter of the fixing screw, so as to avoid the fracturing of internal stress caused by thermal expansion and cold contraction.
  2. When the synthetic resin tile and steel plate are overlapped vertically, a minimum of 200mm overlap and two water stops must be placed
  3. The main tile should be installed in reverse according to the local wind direction. A wave peak (including the ridge tile joint) should be overlapped horizontally between the two tiles, and a tile pitch should be overlapped in longitudinal. The joint must be fixed at the contact position with self-tapping bolts on the purlin.
  4. The slope roof on both sides must be installed synchronously and symmetrical on both sides to match the waveform when the ridge tile is installed.
  5. The joint of straight ridge tile and inclined ridge tile should be treated and leveled for the installation of three links.
  6. During the construction of synthetic resin tile, it is strictly prohibited to step on the crest to avoid the cracking of the light board. We must place a non-skid board in the transverse position of the light board, and your feet step on it to work on the guide hole and fixing screw of the light board.
  7. The fixparts are special self-tapping bolts. First cushion the bolt gasket and then tighten it moderately with electric wrench, and then cover the waterproof cap.

Resin tile installation is not difficult, professional resin tile manufacturers have perfect after-sales service, can provide installation video or on-site guidance installation, some simple projects can be installed by themselves, but larger or more complex projects, or it is recommended to ask a professional construction team for installation, in order to ensure the use of resin tile effect.

Похожие сообщения