Installation and fixing methods of daylighting tiles

The main purpose of installing lighting tiles is to daylighting, shelter from wind and rain, etc. We use them with PVC anti-corrosion tiles, which are widely used in hospitals, breeding and breeding industries, industrial plants, shopping malls, etc. This ensures that, let’s share the installation and fixing methods of the lighting tile

1. First of all, we should check the quality, specification and size of the lighting tile, and make full preparation for our lighting tile installation.
2. When fixing the daylighting tile, the fixing piece shall be kept in correct position and connected correctly, and the spacing between fixing points of each tile shall not be greater than 600mm.
3. If you choose to purchase polycarbonate lighting tiles, polycarbonate lighting tiles need to be fixed with fasteners of aluminum profiles, and corrugated lighting tiles are fixed with lighting tile brackets and self-tapping screws, and then sealed with glue.
4. If we fix it with self-tapping screws, we must have a cover plate, but we should pay attention to the opening at the self-tapping screw. We should open a little more space to prevent the daylighting tile from being cut by the self-tapping screw due to thermal expansion and cold shrinkage.
5. After the installation of our lighting tiles, first check the gap spacing between the lighting tiles, and then check whether the installation is firm or not. If there is any problem, timely adjust it.

The above details can effectively improve the service life and effect of the lighting tile.