Roof tile installation full guide, so that your house look more beautiful

With the continuous development of society, people’s requirements for living environment are getting higher and higher. As a part of the appearance of the house, the installation of tiles is an effective way to improve the beauty of the house. There are some important steps and tips to watch out for before installing the roof tiles. Let’s take a look together.

1. Line-out to ensure beauty Before the formal installation, be sure to set out the line according to the actual situation of the outer layer of the house. This step is the basis for ensuring that the tiles are horizontal and vertical, appropriate in quantity, and beautiful in shape. Through reasonable laying out, can effectively avoid the late adjustment and correction, improve the installation efficiency.
2. Main tile installation skills The installation of the main tile is crucial to ensure that the side front center and the auxiliary line coincide. At the same time, the upper and lower parts of the main tile are parallel to the auxiliary line to ensure that the overall effect is more unified. This step is the cornerstone of the entire installation process and must be done carefully.
3. The clever lap of the main ridge tiles The installation of the main ridge tile should start from the side of the main tile area on the ridge line, and the first tile lap area should be careful to avoid overlapping with the main tile. Form an elegant waveform in the middle of the two ridge tiles to enhance the beauty of the overall roof.
4. Precise installation of the inclined ridge tile The inclined ridge tile is installed on the inclined edge of the multi-slope roof to ensure that the upper and bottom sides are on the main tile purlin. The two diagonal ridge tiles need to be connected to 30 mm, and the end is installed. This step is the key to the roof structure and requires precision and patience.
5. Reasonable settlement of the three Tong tiles The installation of three-way tiles needs to be carried out after the installation of regular and inclined tiles. One side is placed on the main ridge tile, and the other side is placed on the inclined ridge tile. Through reasonable installation, the three-tong tiles can be skillfully installed at the top of the intersection of the three sides, adding much color to the overall structure.
6. The clever design of the sealing eaves The sealing eaves are set together with the lower section of the main tile, and the main tile is double loaded with the main tile tail end. If the main tile head is too large from the purlin, or the length of the eaves is insufficient, it can be fixed by bolts. The reasonable design of sealing eaves can not only increase the overall beauty of the roof, but also improve the stability of the roof.

Through the above roof tile installation strategy, I believe you can easily deal with the installation of roof tiles, so that the appearance of your house more beautiful, stable. Throughout the installation process, you must pay attention to every detail to ensure that the final results are satisfactory.