Synthetic resin tile is a kind of light, waterproof, fire prevention, earthquake resistance, wind resistance and other excellent roof materials, suitable for a variety of roof structures, including cast-in-place reinforced concrete slope roof, wooden slope roof and steel structure slope roof. When installing the synthetic resin tiles:
- The roof base should be flat and firm to ensure the installation quality of the current strip and hanging tiles, so as to ensure the installation quality of synthetic resin decorative tiles.
- For the cast-in-place reinforced concrete slope roof, it is necessary to set up the partition joints, the seam width should be 20mm, the spacing should be 3m4m, and fill in with the inlay material. For wooden slope roof and steel structure slope roof, it is necessary to select the appropriate hanging tile spacing to ensure that 3 mm5mm deformation joint is reserved between the plate and plate, and the plate, purlin or roof beam are connected with bolt, galvanized nails or white tapping screws.
- When installing the strip, the strip should be fixed on the embedded parts, and then the hanging tile should be fixed on the strip. The fixation method can be adopted by welding, bolts or self-tapping screws, specifically according to the actual situation.
- In the construction process of construction, it is necessary to ensure that the laying order, lap sequence and construction specifications of synthetic resin tiles meet the relevant requirements to ensure the installation quality.
- In daily maintenance, the installation of synthetic resin tile should be checked regularly, and whether the tile surface is damaged, and repaired and replaced in time to prolong the service life of the tile surface.
In short, in the selection of synthetic resin tile as the roof material, the appropriate roof structure should be selected according to the actual situation, and pay attention to the details in the construction and daily maintenance, to ensure the safe, beautiful and lasting safety of synthetic resin tile.